Directions to
Montague Tool & Supply
42 Broad Street, Branchville, NJ 07826
Phone 973-948-6400

Click Below for Directions From:
Route I-80 or Rte 15 in New Jersey
Newark International Airport
Newark & New York City Area
Easton, Allentown, Bethlehem Area
I- 84 traveling eastbound from Pennsylvania
I-84 traveling westbound from lower New York State

From:
Route I-80 or Rte 15 in New Jersey

·       Take Interstate 80  to Exit 34 marked “Sparta-Jefferson, Route 15 NORTH”. 

·       Follow State Route 15 approximately 19 miles to Ross’ Corner, where Route 15 ends, and Route 206 continues north. (There is an Exxon Station on the your left and a Baseball Stadium off in the distance on your right).  

·       Follow Route 206 north approximately 2 miles to 2^nd Traffic Light (you will see a  Real Estate office on corner and Catholic church on the left) and turn right and then a quick left at yield sign onto Broad Street (Route 630).  

·       Follow Broad Street approximately ½ mile north to Montague Tool & Supply Building on left (1^st commercial building after residential houses)

·       Montague Tool is a large gray building with a red metal roof located on the west side of Broad Street (If you arrive in center of town at 5 corner intersection, you have gone too far).

  From:

Newark International Airport

·       Exit airport.  Take US Route 1 & 9 to Interstate 78 Westbound.  

·       Take Interstate 78 westbound 8 miles to State Rte 24 marked Morristown /Springfield.  

·       Take State Highway 24 westbound 10 miles to Interstate 287 northbound. 

·       Take Interstate 287 northbound 4 miles to Interstate 80 westbound marked "Delaware Water Gap".  

·       Take Interstate 80 westbound to Exit 34 marked “Sparta-Jefferson, Route 15” Northbound.

·      Follow State Route 15 approximately 19 miles to Ross’ Corner (just past the town of Lafayette), where Route 15 ends, and Route 206 continues north. (There is an Exxon Station on the your left and a Baseball Stadium off in the distance on your right). 

·      Follow Route 206 north approximately 2 miles to 2^nd Traffic Light (you will see a  Realty office on corner and Catholic church on the left) and turn right and then a quick left at yield sign onto Broad Street (Route 630).  

·       Follow Broad Street approximately ½ mile north to Montague Tool & Supply Building on left (1^st commercial building after residential houses)

·       Montague Tool is a large gray building with a red metal roof located on the west side of Broad Street (If you arrive in center of town at 5 corner intersection, you have gone too far).

From:

Newark & New York City Area

·       Take Interstate 80 westbound to Exit 34 marked “Sparta-Jefferson, Route 15” Northbound.

·      Follow State Route 15 approximately 19 miles to Ross’ Corner (just past the town of Lafayette), where Route 15 ends, and Route 206 continues north. (There is an Exxon Station on the your left and a Baseball Stadium off in the distance on your right).  

·      Follow Route 206 north approximately 2 miles to 2^nd Traffic Light (you will see a  Realty office on corner and Catholic church on the left) and turn right and then a quick left at yield sign onto Broad Street (Route 630).  

·       Follow Broad Street approximately ½ mile north to Montague Tool & Supply Building on left (1^st commercial building after residential houses)

·       Montague Tool is a large gray building with a red metal roof located on the west side of Broad Street (If you arrive in center of town at 5 corner intersection, you have gone too far).

From:

Easton, Allentown, Bethlehem Area

·       Follow Route 22 to Route 611 North. (The exit for Route 611 is the last exit in Pennsylvania before crossing the Delaware River into Phillipsburg, N.J.) 

·       Follow Route 611 North through Martins Creek (Where Route 611 North makes a sharp right hand turn at the Traffic Light, and approximately 2 miles past the light makes a sharp left up the steep hill) approximately 15 miles to the Portland, Pa. Bridge.  Cross the bridge into New Jersey to Columbia and follow signs for Route 94 North (toward Blairstown & Newton). 

·       Follow Route 94 North approximately 27 miles to Newton.  You will come to a Town Square which Route 94 passes on three sides (One right turn followed by two left turns) and continues North as part of Route 206 North.  Approximately 2 miles out of Newton, you will come to a traffic light where Route 206 continues straight ahead and Route 94 North departs to the right. (You will see a Mercedes Dealer on the Northeast corner of this intersection).  Continue straight on Route 206 north.

·       Follow Route 206 North approximately 2 miles to the next traffic light which will be junction of Route 15 and 206.  At this intersection (marked by an Exxon Station on the Northwest Corner) you will make a left turn and follow Route 206 North towards Branchville.

·       Follow Route206 north approximately 2 miles to 2^nd Traffic Light (you will see a Realty office on corner and Catholic church on the left) and turn right and then a quick left at yield sign onto Broad Street (Route 630).  

·       Follow Broad Street approximately ½ mile north to Montague Tool & Supply Building on left (1^st commercial building after residential houses)

·       Montague Tool is a large gray building with a red metal roof located on the west side of Broad Street (If you arrive in center of town at 5 corner intersection, you have gone too far).

From:

I- 84 traveling eastbound from Pennsylvania

• Follow Interstate 84 to the exit marked “Route 6, Milford”.
   
• Follow Route 6 down the hill into the town of Milford until Route 6 joins Route 209 South at a traffic light (the only light in town). 
  
• Continue straight at the traffic light (which now will be Route 209 South) approximately 1 mile until you see a bridge plaza on your left marked “Toll bridge to New Jersey – Route 206 South (there is no toll southbound). 
  
• Cross Bridge onto Route 206 South into New Jersey and travel on Route 206 approx 14 miles to traffic light at the intersection of Route 206 and County Route (blue sign) 519.  Turn left at light onto Route 519 and proceed to sharp left hand bend.  After bend make first right turn onto Milk Street.
  
• Travel one block on Milk Street to Broad Street.  Turn right onto Broad Street and building is immediately on right side.  Look for gray feed store like building with dark red metal roof.

 From:

I-84 traveling westbound from lower New York State

·       Follow Interstate 84 westbound towards Port Jervis, New York.  

·       Exit Interstate 84 at last exit in New York State, marked “Port Jervis, Sussex”.  

·       At the end of a very short exit take a left turn onto Route 6 West.  

·       Take Route 6 west a few hundred feet to the traffic light and make another left turn onto New Jersey State Highway 23 South.  Take 23 South past the Tri-State Mall (on your left), a Dairy Queen (on your right) to Clove Road.  

·       Clove Road is on your right, several hundred yards beyond the Dairy Queen.  Take a right on Clove Road and carefully (watch for deer, bear, and insane local drivers) 8 miles to the end where it meets route 206.

·       Make a left turn on to Route 206 south following signs .  

·      Travel on Route 206 approx 14 miles to the (first) traffic light at the intersection of Route 206 and County Route (blue sign) 519.  Turn left at light onto Route 519 and proceed to sharp left hand bend.  After bend make first right turn onto Milk Street.